AI Generated

Architect Uses Living Bacteria to Turn Sand Into Cement-Free Building Materials

ETH Zurich researcher combines bacteria, sand and 3D printing to create alternatives to cement-based construction materials.

Supported by

Architect and researcher Karen Antorveza Paez at ETH Zurich, Switzerland, is exploring an alternative to conventional cement by using living bacteria to bind ordinary sand into solid building materials. The process, known as microbial induced calcium carbonate precipitation (MICP), uses bacteria to produce calcium carbonate crystals that hold sand particles together.

By combining this biological process with 3D printing and robotic fabrication, researchers have developed methods to create intricate architectural components. The material can mineralise within two to five days at room temperature, potentially offering a less energy-intensive approach to construction. However, questions surrounding structural strength, durability and environmental impact remain.

How Living Bacteria Transform Sand Into Solid Building Materials

Traditional cement manufacturing requires heating raw materials at temperatures exceeding 1,000°C and contributes significantly to carbon dioxide emissions from the construction industry. Karen Antorveza Paez, who completed her doctoral research at ETH Zurich, is investigating how microorganisms could help produce building materials through a different process.

Her research uses a bacterium called Sporosarcina pasteurii, which produces an enzyme known as urease. When the bacteria are combined with sand and a mineralisation solution containing urea and calcium chloride, the enzyme breaks down the urea, releasing carbonate ions. These ions react with calcium to form calcium carbonate, the same mineral found in limestone, chalk and seashells.

Microscopic calcium carbonate crystals develop between individual sand grains, creating interconnected mineral structures that bind the particles together. This process is known as Microbially Induced Calcite Precipitation (MICP), commonly called biocementation.

For 3D printing, researchers developed a specialised bio-ink containing water, natural substances such as alginate and xanthan, sand and living bacteria. The mixture can be shaped into predetermined architectural designs using an extrusion-based 3D printer. The printed components are subsequently immersed in a mineralisation bath, where the bacteria initiate the process of forming the mineral binder.

According to ETH Zurich, the mineralisation process takes approximately two to five days, depending on the desired strength of the component. The mineralisation solution is refreshed daily before the finished structure is allowed to dry at room temperature. Once the process is complete, the bacteria are no longer active.

3D Printing and Robotics Expand Architectural Possibilities

The research explores two manufacturing approaches: 3D biocement printing and robotic biocementation spraying. While the first focuses on creating customised architectural components, the second uses automated systems to build mineralised structures layer by layer.

In robotic spraying, a robotic arm repeatedly deposits sand, bacteria and the substances required for mineral formation onto a surface. The process draws inspiration from stromatolites, naturally occurring layered rock formations created through microbial mineral deposition.

The technique was demonstrated at the 2025 Venice Architecture Biennale, where the robotic process operated continuously for six months, allowing visitors to observe the formation of the structures.

The two methods offer different possibilities. 3D printing is being developed for architectural elements such as facade components, sunshades and partition walls, while robotic spraying is being explored for creating architectural surfaces.

The research has also demonstrated a double-curved architectural component measuring approximately 30 × 20 × 20 centimetres. Its intricate geometry highlights how digital fabrication can help produce forms that would be difficult to achieve through conventional manufacturing methods.

The Logical Indian’s Perspective

The development offers an interesting direction for sustainable construction by bringing together microbiology, architecture and digital manufacturing. Reducing dependence on conventional cement in selected applications could help address some of the environmental challenges associated with the construction industry.

However, biocementation is not yet a ready replacement for conventional concrete. Researchers acknowledge that the current material is closer to mortar than concrete, and its suitability for load-bearing structures remains a challenge. Long-term durability, mechanical strength and large-scale production also require further investigation.

Another important concern is ammonium, which is generated as a by-product when bacteria break down urea. This substance can be harmful to the environment, making its treatment and disposal essential to assessing the technology’s overall sustainability.

The research team is investigating ways to address these environmental concerns while improving the material’s performance. The larger challenge is to establish reliable methods for controlling mineral formation and producing durable architectural components.

Although the technology remains under development, it demonstrates how biological processes could contribute to the future of building materials. Rather than relying entirely on energy-intensive industrial manufacturing, architects and researchers are exploring ways to work with nature’s own mineral-forming mechanisms. The innovation does not replace conventional construction today, but it opens up another possibility for making the built environment more sustainable.

Also Read: Sundaram Verma: The Man Who Grew 60,000 Trees With Just One Litre of Water in Rajasthan

#PoweredByYou We bring you news and stories that are worth your attention! Stories that are relevant, reliable, contextual and unbiased. If you read us, watch us, and like what we do, then show us some love! Good journalism is expensive to produce and we have come this far only with your support. Keep encouraging independent media organisations and independent journalists. We always want to remain answerable to you and not to anyone else.

Featured

Amplified by

Amazon Prime

For Two Nights in June, Mumbai’s Sea Link and Asiatic Library Wore Light Like They’ve Never Worn It Before

Amplified by

Ministry of Road Transport and Highways

From Risky to Safe: Sadak Suraksha Abhiyan Makes India’s Roads Secure Nationwide

Recent Stories

From Leading CSK To Guiding Its Next Generation: MS Dhoni’s IPL Playing Era Ends

Indore-Based Janak Palta McGilligan Empowered 6,000 Rural Women Across 500 Villages

S.F.R. Snehit And Divyanshi Bhowmick Clinch Gold At National Ranking Table Tennis Championships

Contributors

Writer : 
Editor : 
Creatives :